Additional information
Weight | 0.5 lbs |
---|---|
Dimensions | 2 × 1 × 1 in |
$20.94 USD
This Forstner bit is custom ground to the specific diameter of 0.900″ needed to install our balusters, end caps, recessed lights, and Dek Dots.
Weight | 0.5 lbs |
---|---|
Dimensions | 2 × 1 × 1 in |
Only logged in customers who have purchased this product may leave a review.
Click here for most current information: WARRANTY POLICY.
2655 S. Santa Fe Unit 4-A
Denver, CO 80223 USA
DEKOR®️ Canada Fulfillment
205 Champagne Drive, Unit 3A
Toronto, ON, M3J 2C6, Canada
Toll Free: 1-800-258-0344
Copyright 2024| Privacy Policy | Accessibility Statement | WordPress Web Design & Hosting Santa Barbara
This is a device to be used every 20’ that enhances the signal to create pure colors from the first light to the last.
Yes, you can add to your current non-RGBW DEKOR lighting system by adding RGBW lights! While the non-RGBW DEKOR lighting system is a 2-wire direct current system, and the RGBW DEKOR lighting system is a 3-wire direct current system, you are able to integrate both systems by creating a separate zone. Either using a splitter running from you current transformer or upgrading to a 100 or 200 watt transformer, which has more than one output from the transformer, you can create an additional zone or zones. Please call us if you need us to walk you through this!
Tim Wallace (verified owner) –
Philip Shaw (verified owner) –
Takes a bit of practice to get right but seems good quality
GREG C. (verified owner) –
JOHN ANGIULO (verified owner) –
Need a hole saw with adjustable drill tip. The forstner bit jumps a bit – sometimes wobbles the hole
john h. (verified owner) –
William O. (verified owner) –
Joe B. (verified owner) –
C-clip comes loose while using it…plus the size hole it makes still required a little sanding to the the lights in smoothly. I am sure you could just tap them into the stock bore but I didn’t want to damage them.
Anonymous (verified owner) –
Peter Janson (verified owner) –
Brandon del Gaudio (verified owner) –
Square/hexagon out the bottom so it doesn’t slip in the drill